EdgeLocal

Drywall & Insulation in Massachusetts

573 drywall & insulation in Massachusetts are listed on EdgeLocal. Featured businesses appear first; ratings shown are from each business's Google Business Profile.

Drywall contractors install sheetrock in basements, additions and remodels, tape and mud seams to the specified finish level, apply ceiling and wall textures, and repair water damage, cracks and holes.

Hiring drywall & insulation in Massachusetts: what to know

Drywall contractors hang, tape, finish and repair gypsum board walls and ceilings. Drywall contractors install sheetrock in basements, additions and remodels, tape and mud seams to the specified finish level, apply ceiling and wall textures, and repair water damage, cracks and holes.

How much do drywall & insulation cost?

Typical U.S. pricing is $1,500–$6,000 for a typical room or basement. What moves the price:

Cost factorWhy it matters
Square footagePriced per sheet or per square foot installed.
Finish levelLevel 5 smooth finishes cost more than Level 3 or 4.
Ceiling heightTall or vaulted ceilings need scaffolding.
TextureKnockdown or skim coats add labor.
Moisture-resistant boardBathrooms and basements may need specialty panels.

How to hire a drywall contractor

  1. Specify the finish level. Agree on the drywall finish level before work starts.
  2. Ask about board type. Confirm moisture-resistant or fire-rated board where code requires.
  3. Look at finished work. Check for visible seams and screw pops in past jobs.
  4. Clarify cleanup. Sanding dust control and debris removal should be included.
  5. Coordinate with other trades. Insulation and electrical inspections must pass before hanging.

Red flags to watch for

  • Hangs drywall before rough inspections pass
  • Vague about finish level
  • No dust protection plan
  • Requests full payment before taping and finishing

Licensing

Drywall work is typically covered by state contractor registration or licensing rules; no separate drywall license is required in most of the region.

Best time to hire

Drywall work is year-round and indoors; winter basement finishing is especially common.

Related services

Drywall & Insulation in Massachusetts: FAQs

How long does drywall take?

A basement can take 1–2 weeks to hang, tape, mud and sand, depending on drying time between coats.

Can water-damaged drywall be repaired?

Small stains can be sealed and repainted, but soft, swollen or moldy drywall should be cut out and replaced.

What are nail pops?

Fasteners that push through the surface as framing dries or shifts; they are easy to reset and patch.

How much do drywall & insulation charge?

Typical U.S. pricing runs about $1,500–$6,000 for a typical room or basement. The biggest drivers are square footage, finish level, ceiling height. These are industry estimates, not EdgeLocal data — get at least three written quotes.

Do drywall & insulation need a license?

Drywall work is typically covered by state contractor registration or licensing rules; no separate drywall license is required in most of the region.

When is the best time to hire a drywall contractor?

Drywall work is year-round and indoors; winter basement finishing is especially common.

Need drywall & insulation?

Get Free Quotes