EdgeLocal

How Much Does Drywall Cost in Missouri? — 2026 Guide

Drywall hanging, finishing, texture and repair.

Average cost range

$1,500–$6,000

for a typical room or basement

Cost factorImpact on price
Square footagePriced per sheet or per square foot installed.
Finish levelLevel 5 smooth finishes cost more than Level 3 or 4.
Ceiling heightTall or vaulted ceilings need scaffolding.
TextureKnockdown or skim coats add labor.
Moisture-resistant boardBathrooms and basements may need specialty panels.
Typical range$1,500–$6,000 for a typical room or basement

Two similar-looking jobs can be priced very differently once materials, access and local labor rates in Missouri are taken into account, so the most reliable number is a written quote for your project.

Typical U.S. ranges from industry sources (2024–25); not EdgeLocal data. Your quote will vary with scope, materials and location.

EdgeLocal lists 473 drywall & insulation in Missouri and 3,507 across all locations.

Find drywall & insulation in Missouri

How to get quotes

  1. Describe your project once: what needs doing, your ZIP code and your timeline.
  2. EdgeLocal sends your request to local drywall & insulation who cover your area.
  3. Compare two or three written quotes on scope, materials, timeline and warranty — not just price.

Get Free Quotes from Local Drywall & Insulation

What affects the cost

  • Square footage and ceiling height
  • Finish level (Level 1 through Level 5)
  • Texture matching on repairs
  • Moisture- or fire-rated board requirements
  • Whether priming and painting are included

Questions to ask before you hire

  • What finish level is included in your quote?
  • Can you match the existing texture on repairs?
  • Can you show proof of general liability insurance and, if you have employees, workers’ compensation coverage?
  • Will you give me a written, itemized estimate and a written contract before work starts?
  • What warranty do you offer on labor, and who handles manufacturer warranty claims?

Verify your contractor

Iowa requires contractors doing residential construction over $2,000 to be registered with the Iowa Division of Labor under Iowa Code Chapter 91C. Before you sign, check the registration number on the estimate against the state registry.

Look up an Iowa contractor registration

What drywall & insulation do

Drywall contractors install sheetrock in basements, additions and remodels, tape and mud seams to the specified finish level, apply ceiling and wall textures, and repair water damage, cracks and holes.

Find drywall & insulation by state

Hiring drywall & insulation in Missouri: what to know

Drywall contractors hang, tape, finish and repair gypsum board walls and ceilings. Drywall contractors install sheetrock in basements, additions and remodels, tape and mud seams to the specified finish level, apply ceiling and wall textures, and repair water damage, cracks and holes.

Typical U.S. ranges from industry sources (2024–25); not EdgeLocal data. Your quote will vary with scope, materials and location.

How to hire a drywall contractor

  1. Specify the finish level. Agree on the drywall finish level before work starts.
  2. Ask about board type. Confirm moisture-resistant or fire-rated board where code requires.
  3. Look at finished work. Check for visible seams and screw pops in past jobs.
  4. Clarify cleanup. Sanding dust control and debris removal should be included.
  5. Coordinate with other trades. Insulation and electrical inspections must pass before hanging.

Red flags to watch for

  • Hangs drywall before rough inspections pass
  • Vague about finish level
  • No dust protection plan
  • Requests full payment before taping and finishing

Licensing in Missouri

Drywall work is typically covered by state contractor registration or licensing rules; no separate drywall license is required in most of the region.

Missouri has no statewide general contractor license. Licensing for electricians, plumbers and general contractors is handled by cities and counties such as Kansas City, St. Louis and Springfield.

Best time to hire

Drywall work is year-round and indoors; winter basement finishing is especially common.

Related services

Drywall cost FAQs

How do I find a good drywall contractor in Missouri?

Compare local drywall & insulation on EdgeLocal by Google rating, review count and hours, then request written quotes from at least three. Verify Missouri licensing where it applies.

How much does a drywall contractor cost in Missouri?

Typical U.S. pricing is about $1,500–$6,000 for a typical room or basement. Local prices in Missouri vary with labor rates, materials and season — these figures are industry estimates, not EdgeLocal data.

How long does drywall take?

A basement can take 1–2 weeks to hang, tape, mud and sand, depending on drying time between coats.

Can water-damaged drywall be repaired?

Small stains can be sealed and repainted, but soft, swollen or moldy drywall should be cut out and replaced.

What are nail pops?

Fasteners that push through the surface as framing dries or shifts; they are easy to reset and patch.

Do drywall & insulation need a license in Missouri?

Drywall work is typically covered by state contractor registration or licensing rules; no separate drywall license is required in most of the region. In Missouri: Missouri has no statewide general contractor license.

How do I verify a contractor in Iowa?

Iowa requires contractors doing residential construction over $2,000 to register with the Iowa Division of Labor (Iowa Code Chapter 91C). You can look up a registration on EdgeLocal’s verify page.

Related cost guides

Get free quotes from local drywall & insulation