EdgeLocal

How Much Does Tile Installation Cost in Missouri? — 2026 Guide

Floor, wall, backsplash and shower tile installation.

Average cost range

$1,200–$6,500

for a backsplash to a tiled shower

Cost factorImpact on price
Tile size and typeLarge-format porcelain and natural stone need more prep and skill.
PatternHerringbone and mosaic patterns take longer.
Substrate prepLeveling and uncoupling membranes add cost.
WaterproofingShower membranes are essential and add labor.
Trim and edgesSchluter trim, bullnose and niches add detail work.
Typical range$1,200–$6,500 for a backsplash to a tiled shower

Two similar-looking jobs can be priced very differently once materials, access and local labor rates in Missouri are taken into account, so the most reliable number is a written quote for your project.

Typical U.S. ranges from industry sources (2024–25); not EdgeLocal data. Your quote will vary with scope, materials and location.

EdgeLocal lists 0 tile contractors in Missouri.

Find tile contractors in Missouri

How to get quotes

  1. Describe your project once: what needs doing, your ZIP code and your timeline.
  2. EdgeLocal sends your request to local tile contractors who cover your area.
  3. Compare two or three written quotes on scope, materials, timeline and warranty — not just price.

Get Free Quotes from Local Tile Contractors

What affects the cost

  • Tile size, material and pattern complexity
  • Substrate preparation and leveling
  • Waterproofing in wet areas
  • Grout type (cement or epoxy)
  • Trim, niches and edge details

Questions to ask before you hire

  • What underlayment or backer board will you use?
  • How do you handle lippage on large-format tile?
  • Can you show proof of general liability insurance and, if you have employees, workers’ compensation coverage?
  • Will you give me a written, itemized estimate and a written contract before work starts?
  • What warranty do you offer on labor, and who handles manufacturer warranty claims?

Verify your contractor

Iowa requires contractors doing residential construction over $2,000 to be registered with the Iowa Division of Labor under Iowa Code Chapter 91C. Before you sign, check the registration number on the estimate against the state registry.

Look up an Iowa contractor registration

What tile contractors do

Tile setters prepare substrates, install waterproofing and backer board, set floor and wall tile, build shower pans and niches, grout and seal, and repair cracked or loose tile.

Find tile contractors by state

Hiring tile contractors in Missouri: what to know

Tile contractors install ceramic, porcelain and stone tile on floors, showers and backsplashes. Tile setters prepare substrates, install waterproofing and backer board, set floor and wall tile, build shower pans and niches, grout and seal, and repair cracked or loose tile.

Typical U.S. ranges from industry sources (2024–25); not EdgeLocal data. Your quote will vary with scope, materials and location.

How to hire a tile setter

  1. Ask about waterproofing systems. Showers need a membrane or liner, not just backer board.
  2. Check flatness standards. Large tile needs a flat substrate to prevent lippage.
  3. Review previous showers. Look for straight grout lines and clean cuts.
  4. Confirm grout and sealer. Ask about epoxy or high-performance grout options.
  5. Clarify demolition. Old tile removal is often priced separately.

Red flags to watch for

  • Sets tile directly on drywall in a shower
  • Uneven grout lines in past work
  • No mention of a membrane
  • Rushes grout before thinset cures

Licensing in Missouri

Tile work is generally covered under state contractor registration; plumbing changes in showers require a licensed plumber.

Missouri has no statewide general contractor license. Licensing for electricians, plumbers and general contractors is handled by cities and counties such as Kansas City, St. Louis and Springfield.

Best time to hire

Tile work is indoor and year-round; schedule early if it is part of a larger kitchen or bath remodel.

Related services

Tile Installation cost FAQs

How do I find a good tile setter in Missouri?

Compare local tile contractors on EdgeLocal by Google rating, review count and hours, then request written quotes from at least three. Verify Missouri licensing where it applies.

How much does a tile setter cost in Missouri?

Typical U.S. pricing is about $1,200–$6,500 for a backsplash to a tiled shower. Local prices in Missouri vary with labor rates, materials and season — these figures are industry estimates, not EdgeLocal data.

Why does grout crack?

Movement in the floor, missing expansion joints or poor substrate prep are the usual causes.

Is porcelain better than ceramic?

Porcelain is denser and more water resistant, making it better for floors and showers.

How long before I can use a new tile shower?

Usually 24–72 hours after grouting, depending on products used.

Do tile contractors need a license in Missouri?

Tile work is generally covered under state contractor registration; plumbing changes in showers require a licensed plumber. In Missouri: Missouri has no statewide general contractor license.

How do I verify a contractor in Iowa?

Iowa requires contractors doing residential construction over $2,000 to register with the Iowa Division of Labor (Iowa Code Chapter 91C). You can look up a registration on EdgeLocal’s verify page.

Related cost guides

Get free quotes from local tile contractors