EdgeLocal

How Much Does Concrete Work Cost in Illinois? — 2026 Guide

Driveways, patios, sidewalks, slabs and steps.

Average cost range

$3,500–$12,000

for a typical driveway or patio

Cost factorImpact on price
Square footage and thicknessDriveways need thicker slabs than walkways.
RemovalBreaking out old concrete adds labor and disposal.
FinishStamped or colored concrete costs more than broom finish.
ReinforcementRebar or wire mesh adds strength.
Site accessPump trucks may be needed for hard-to-reach areas.
Typical range$3,500–$12,000 for a typical driveway or patio

Two similar-looking jobs can be priced very differently once materials, access and local labor rates in Illinois are taken into account, so the most reliable number is a written quote for your project.

Typical U.S. ranges from industry sources (2024–25); not EdgeLocal data. Your quote will vary with scope, materials and location.

EdgeLocal lists 1,400 concrete contractors in Illinois and 5,615 across all locations.

Find concrete contractors in Illinois

How to get quotes

  1. Describe your project once: what needs doing, your ZIP code and your timeline.
  2. EdgeLocal sends your request to local concrete contractors who cover your area.
  3. Compare two or three written quotes on scope, materials, timeline and warranty — not just price.

Get Free Quotes from Local Concrete Contractors

What affects the cost

  • Square footage and slab thickness
  • Removal of existing concrete
  • Base preparation and grading
  • Reinforcement (rebar or wire mesh)
  • Decorative finishes such as stamping or coloring
  • Access for the concrete truck

Questions to ask before you hire

  • What thickness and reinforcement will you use?
  • How do you prevent and handle cracking?
  • Can you show proof of general liability insurance and, if you have employees, workers’ compensation coverage?
  • Will you give me a written, itemized estimate and a written contract before work starts?
  • What warranty do you offer on labor, and who handles manufacturer warranty claims?

Verify your contractor

Iowa requires contractors doing residential construction over $2,000 to be registered with the Iowa Division of Labor under Iowa Code Chapter 91C. Before you sign, check the registration number on the estimate against the state registry.

Look up an Iowa contractor registration

What concrete contractors do

Concrete contractors grade and compact base, set forms and reinforcement, pour and finish driveways, patios, garage floors and walkways, cut control joints, apply sealers and repair cracked or sunken slabs.

Find concrete contractors by state

Hiring concrete contractors in Illinois: what to know

Concrete contractors pour and repair driveways, patios, sidewalks, slabs and steps. Concrete contractors grade and compact base, set forms and reinforcement, pour and finish driveways, patios, garage floors and walkways, cut control joints, apply sealers and repair cracked or sunken slabs.

Typical U.S. ranges from industry sources (2024–25); not EdgeLocal data. Your quote will vary with scope, materials and location.

How to hire a concrete contractor

  1. Ask about base prep. Proper gravel base and compaction prevent settling.
  2. Confirm thickness and reinforcement. Get slab thickness and rebar/mesh in writing.
  3. Discuss control joints. Joints control where cracks occur.
  4. Ask about curing and sealing. Proper curing improves durability through freeze-thaw.
  5. Check drainage. Slabs should slope away from the house.

Red flags to watch for

  • Pours on frozen ground
  • No base preparation
  • Will not specify thickness
  • Adds water to make concrete easier to finish

Licensing in Illinois

Concrete contractors usually need state contractor registration (such as Iowa) plus local permits for driveways and approaches.

Illinois has no statewide general contractor license; licensing is handled by cities and counties. Roofers must be licensed by the Illinois Department of Financial and Professional Regulation, and plumbers by the Illinois Department of Public Health. Radon professionals are licensed by the Illinois Emergency Management Agency.

Best time to hire

Concrete season runs roughly April through October. Avoid pours when overnight temperatures drop below freezing unless cold-weather practices are used.

Related services

Concrete Work cost FAQs

How do I find a good concrete contractor in Illinois?

Compare local concrete contractors on EdgeLocal by Google rating, review count and hours, then request written quotes from at least three. Verify Illinois licensing where it applies.

How much does a concrete contractor cost in Illinois?

Typical U.S. pricing is about $3,500–$12,000 for a typical driveway or patio. Local prices in Illinois vary with labor rates, materials and season — these figures are industry estimates, not EdgeLocal data.

How long before I can drive on new concrete?

Typically 7 days for passenger vehicles; heavier vehicles should wait about 28 days.

Should I seal my concrete driveway?

Yes. Sealing every few years helps resist deicing salts and freeze-thaw damage.

Can sunken concrete be raised?

Often yes, using mudjacking or polyurethane foam lifting, which costs less than replacement.

Do concrete contractors need a license in Illinois?

Concrete contractors usually need state contractor registration (such as Iowa) plus local permits for driveways and approaches. In Illinois: Illinois has no statewide general contractor license; licensing is handled by cities and counties.

How do I verify a contractor in Iowa?

Iowa requires contractors doing residential construction over $2,000 to register with the Iowa Division of Labor (Iowa Code Chapter 91C). You can look up a registration on EdgeLocal’s verify page.

Related cost guides

Get free quotes from local concrete contractors