EdgeLocal

How Much Does Masonry Cost in Illinois? — 2026 Guide

Brick, block and stone construction, tuckpointing and repair.

Average cost range

$1,500–$10,000

for repairs to retaining walls and veneer

Cost factorImpact on price
MaterialNatural stone costs more than brick or block.
Height and accessChimney and second-story work requires scaffolding.
Repair extentTuckpointing is priced by square foot of mortar joints.
Structural needsRetaining walls over four feet may require engineering.
Color matchingMatching historic brick and mortar takes extra effort.
Typical range$1,500–$10,000 for repairs to retaining walls and veneer

Two similar-looking jobs can be priced very differently once materials, access and local labor rates in Illinois are taken into account, so the most reliable number is a written quote for your project.

Typical U.S. ranges from industry sources (2024–25); not EdgeLocal data. Your quote will vary with scope, materials and location.

EdgeLocal lists 1,029 masonry contractors in Illinois and 2,436 across all locations.

Find masonry contractors in Illinois

How to get quotes

  1. Describe your project once: what needs doing, your ZIP code and your timeline.
  2. EdgeLocal sends your request to local masonry contractors who cover your area.
  3. Compare two or three written quotes on scope, materials, timeline and warranty — not just price.

Get Free Quotes from Local Masonry Contractors

What affects the cost

  • Material: brick, block, natural or manufactured stone
  • Repair versus new construction
  • Height and scaffolding needs
  • Mortar color matching
  • Structural issues behind the masonry

Questions to ask before you hire

  • How will you match the existing brick and mortar?
  • Is the damage cosmetic or structural?
  • Can you show proof of general liability insurance and, if you have employees, workers’ compensation coverage?
  • Will you give me a written, itemized estimate and a written contract before work starts?
  • What warranty do you offer on labor, and who handles manufacturer warranty claims?

Verify your contractor

Iowa requires contractors doing residential construction over $2,000 to be registered with the Iowa Division of Labor under Iowa Code Chapter 91C. Before you sign, check the registration number on the estimate against the state registry.

Look up an Iowa contractor registration

What masonry contractors do

Masons tuckpoint deteriorated mortar, rebuild chimneys, install retaining walls and stone veneer, build fireplaces and outdoor kitchens and repair brick steps and foundations.

Find masonry contractors by state

Hiring masonry contractors in Illinois: what to know

Masonry contractors build and repair brick, block and stone walls, chimneys and patios. Masons tuckpoint deteriorated mortar, rebuild chimneys, install retaining walls and stone veneer, build fireplaces and outdoor kitchens and repair brick steps and foundations.

Typical U.S. ranges from industry sources (2024–25); not EdgeLocal data. Your quote will vary with scope, materials and location.

How to hire a mason

  1. Ask about mortar matching. Mortar should match original color and hardness.
  2. Review portfolio. Look for clean, consistent joints.
  3. Confirm drainage for walls. Retaining walls need drainage stone and pipe.
  4. Check permits. Tall walls and chimneys may require permits.
  5. Get warranty terms. Ask about workmanship warranty length.

Red flags to watch for

  • Uses hard modern mortar on soft historic brick
  • No drainage plan for retaining walls
  • Seals brick with non-breathable coatings
  • Pressure to rebuild when repair is possible

Licensing in Illinois

Masonry contractors need state contractor registration where required (such as Iowa) and local permits for structural work.

Illinois has no statewide general contractor license; licensing is handled by cities and counties. Roofers must be licensed by the Illinois Department of Financial and Professional Regulation, and plumbers by the Illinois Department of Public Health. Radon professionals are licensed by the Illinois Emergency Management Agency.

Best time to hire

Masonry is best done April–October when mortar can cure above freezing.

Related services

Masonry cost FAQs

How do I find a good mason in Illinois?

Compare local masonry contractors on EdgeLocal by Google rating, review count and hours, then request written quotes from at least three. Verify Illinois licensing where it applies.

How much does a mason cost in Illinois?

Typical U.S. pricing is about $1,500–$10,000 for repairs to retaining walls and veneer. Local prices in Illinois vary with labor rates, materials and season — these figures are industry estimates, not EdgeLocal data.

What is tuckpointing?

Removing deteriorated mortar and replacing it with new mortar to protect masonry from water.

How long does brick last?

Brick can last 100+ years; mortar typically needs repointing every 25–30 years.

Why are retaining walls failing?

Most failures come from poor drainage and inadequate base.

Do masonry contractors need a license in Illinois?

Masonry contractors need state contractor registration where required (such as Iowa) and local permits for structural work. In Illinois: Illinois has no statewide general contractor license; licensing is handled by cities and counties.

How do I verify a contractor in Iowa?

Iowa requires contractors doing residential construction over $2,000 to register with the Iowa Division of Labor (Iowa Code Chapter 91C). You can look up a registration on EdgeLocal’s verify page.

Related cost guides

Get free quotes from local masonry contractors