Waterproofing Contractors in Phoenix, Arizona
Basement waterproofing and foundation moisture control..
Water intrusion through basement walls and floors is one of the most common and damaging residential problems. Waterproofing contractors address this through interior drainage systems (French drains and sump pumps), exterior excavation and membrane application, crack injection, and vapor barriers. The right approach depends on the source — hydrostatic pressure from a high water table requires different solutions than surface water from poor grading or gutter discharge. A thorough assessment before quoting ensures the solution addresses the root cause rather than just the symptoms.
30
Listed contractors
$3k–$15k
Typical cost
What to look for when hiring a waterproofing contractor
- ✓Ask the contractor to diagnose the water source before proposing a solution.
- ✓Get a transferable lifetime warranty in writing — this matters at resale.
- ✓Confirm the bid includes all components: drainage, sump pump, vapor barrier, and any exterior work.
- ✓Ask about their experience with your foundation type (poured concrete, block, stone).
Waterproofing contractors in Phoenix(30 listed)
How much does waterproofing cost in Phoenix?
Interior French drain + sump pump: $3,000–$8,000. Exterior waterproofing: $8,000–$15,000+. Crack injection: $300–$800 per crack. Full perimeter systems cost more.
Waterproofing contractors in Phoenix — FAQ
How many waterproofing contractors are in Phoenix?
EdgeLocal lists 30 licensed waterproofing contractors in Phoenix, Arizona. All listings are sourced from state licensing registries.
What is the average rating for waterproofing contractors in Phoenix?
Waterproofing contractors in Phoenix are listed on EdgeLocal with ratings sourced from Google Business profiles. Use the directory to compare rated contractors near you.
Do waterproofing contractors in Phoenix need to be licensed?
Yes. Arizona requires waterproofing contractors to hold a valid state license. Always verify a contractor's license is current and in good standing before signing any contract or allowing work to begin.
How do I find a reliable waterproofing contractor in Phoenix?
Start by verifying the contractor holds a valid Arizona license. Check their Google rating and read reviews. Get at least three written estimates. Confirm they carry general liability and workers' compensation insurance. Ask for references from recent Phoenix jobs.
General Waterproofing FAQs
How much does basement waterproofing cost?
Interior basement waterproofing with a French drain and sump pump system typically costs $3,000–$8,000 for a partial perimeter and $6,000–$15,000 for a full perimeter. Exterior waterproofing — excavating around the foundation and applying a waterproof membrane — costs $8,000–$20,000+ because of the excavation involved. Crack injection for individual foundation cracks costs $300–$800 per crack. The right approach depends on the water source: hydrostatic pressure, surface water, or condensation each require different solutions.
What causes basement water problems?
The three main causes of basement water are: (1) surface water from poor grading, downspout discharge too close to the foundation, or inadequate gutters; (2) hydrostatic pressure from a high water table pushing water through the foundation floor and walls; and (3) condensation from warm moist air hitting cool basement walls. Surface water issues are often fixable with grading, gutter extensions, and landscaping changes before investing in an interior drainage system. A waterproofing contractor should diagnose the source before recommending a solution.