Browse Contractors by Trade

Find licensed local contractors by trade category. Each trade page lists contractors across all 50 states, with city-level directories, cost guides, and hiring tips.

EdgeLocal sources listings from state licensing registries and enriches them with ratings and contact info — no paid leads, no middlemen.

Roof replacement, repair, and installation

Typical cost: $5,500–$18,000 per project

Siding contractors and exterior cladding

Typical cost: $8,000–$28,000 per project

Gutter Installation

Seamless gutter installation, repair, and replacement.

Typical cost: $800–$3,500 per project

Gutter Guard Installation

Gutter guard and leaf protection system installation.

Typical cost: $900–$4,500 per project

Window Replacement

Residential window replacement and installation.

Typical cost: $400–$1,200 per window

Glass & Glazing

Commercial and residential glass installation, repair, and replacement.

Typical cost: $150–$800 per unit

Interior and exterior residential painting services.

Typical cost: $3,000–$12,000 per project

Pressure Washing

Pressure washing and power washing for homes and driveways.

Typical cost: $150–$600 per project

Stucco installation, repair, and remediation.

Typical cost: $6,000–$20,000 per project

General Contractor

General construction and contracting

Typical cost: $15,000–$150,000 per project

Residential Remodeling

Home remodeling and renovation

Typical cost: $10,000–$80,000 per project

Residential and commercial structural framing.

Typical cost: $5–$15 per sq ft

Concrete flatwork, foundations, and decorative concrete.

Typical cost: $6–$15 per sq ft

Masonry, brick, and stone work

Typical cost: $2,500–$20,000 per project

Drywall & Insulation

Drywall hanging, finishing, and insulation installation.

Typical cost: $2–$6 per sq ft

Basement waterproofing and foundation moisture control.

Typical cost: $3,000–$15,000 per project

Residential and commercial demolition and site clearing.

Typical cost: $3,000–$25,000 per project

Kitchen Remodeling

Kitchen design, renovation, and remodeling.

Typical cost: $15,000–$75,000 per project

Bathroom Remodeling

Bathroom design, renovation, and remodeling.

Typical cost: $8,000–$35,000 per project

Hardwood, tile, carpet, LVP, and specialty flooring installation.

Typical cost: $3–$15 per sq ft

Finish carpentry, trim, and custom woodwork.

Typical cost: $50–$100 per hour

Cabinet Installation

Kitchen and bathroom cabinet installation and refacing.

Typical cost: $5,000–$25,000 per project

Garage floor epoxy, commercial coatings, and decorative resinous flooring.

Typical cost: $3–$12 per sq ft

Chimney & Fireplace

Chimney sweeping, repair, and fireplace installation.

Typical cost: $150–$5,000 per project

Licensed electrical contractors for residential and commercial work.

Typical cost: $85–$150 per hour

Plumbers and plumbing contractors

Typical cost: $175–$450 per hour

Heating, cooling, and ventilation

Typical cost: $3,500–$16,000 per system

Solar panel installation and solar energy systems.

Typical cost: $15,000–$35,000 per system

Standby and portable generator installation and service.

Typical cost: $5,000–$18,000 per system

Security Systems

Home security system installation and monitoring.

Typical cost: $500–$3,000 per system

Water well drilling, pump installation, and repair.

Typical cost: $3,000–$15,000 per project

Septic system installation, pumping, and repair.

Typical cost: $3,000–$25,000 per project

Radon testing and mitigation system installation.

Typical cost: $800–$2,500 per system

Deck building, patio installation, and outdoor living spaces.

Typical cost: $4,000–$20,000 per project

Fence installation, repair, and replacement

Typical cost: $1,800–$6,500 per project

Landscape design, planting, and lawn care services.

Typical cost: $2,000–$15,000 per project

Pavers, retaining walls, and outdoor stone features.

Typical cost: $3,000–$20,000 per project

Asphalt paving, sealcoating, and repair for driveways and parking lots.

Typical cost: $3,000–$8,000 per project

Swimming pool and hot tub installation, renovation, and service.

Typical cost: $25,000–$80,000 per project

Sprinkler Systems

Lawn irrigation and sprinkler system installation and repair.

Typical cost: $2,500–$6,000 per system

Tree removal, trimming, pruning, and stump grinding.

Typical cost: $300–$3,000 per tree

Residential and commercial snow plowing and ice management.

Typical cost: $30–$100 per push

Garage door installation, repair, and opener service.

Typical cost: $800–$4,000 per project

Site excavation, grading, and earthwork.

Typical cost: $1,500–$10,000 per project

Lot clearing, brush removal, and site preparation.

Typical cost: $1,500–$8,000 per acre

Utility Contractor

Underground utility installation and infrastructure work.

Typical cost: $2,000–$15,000 per project

Home accessibility modifications and ADA compliance.

Typical cost: $500–$8,000 per project

General home repair and small project services.

Typical cost: $50–$100 per hour

Emergency and scheduled roof leak repair and maintenance.

Typical cost: $200–$1,500 per repair

Air conditioning repair, diagnostics, and emergency service.

Typical cost: $100–$600 per repair

Furnace diagnostics, repair, and emergency heating service.

Typical cost: $100–$600 per repair

Clogged drain clearing, sewer line cleaning, and camera inspections.

Typical cost: $100–$500 per service