Well & Pump Contractors in Phoenix, Arizona
Water well drilling, pump installation, and repair..
Well and pump contractors drill new water wells, install and replace submersible and jet pumps, service pressure tanks, and maintain water treatment systems for homes and properties not served by municipal water. Well depth, water quality, and flow rate vary significantly by region and geology. A new residential well typically ranges from 100 to 500+ feet deep depending on the water table. Submersible pumps (installed inside the well casing) are the standard for deep wells, while jet pumps serve shallow wells under 25 feet. Regular maintenance — pressure tank checks, water quality testing, and pump inspection — extends system life and catches problems before you lose water.
4
Listed contractors
4.7
Avg rating (1 rated)
$3k–$15k
Typical cost
Top rated well & pump contractors in Phoenix
What to look for when hiring a well & pump contractor
- ✓Verify the contractor holds a well driller's license issued by your state.
- ✓Ask about flow rate testing and water quality testing as part of new well installation.
- ✓Get a written estimate that covers drilling depth, casing, pump, pressure tank, and all connections.
- ✓Ask about the warranty on the pump and any guarantee on minimum flow rate.
Well & Pump contractors in Phoenix(4 listed)
How much does well & pump cost in Phoenix?
New well drilling: $3,000–$15,000 depending on depth. Pump replacement: $800–$2,500. Pressure tank replacement: $300–$800. Water treatment system: $1,000–$4,000.
Well & Pump contractors in Phoenix — FAQ
How many well & pump contractors are in Phoenix?
EdgeLocal lists 4 licensed well & pump contractors in Phoenix, Arizona. All listings are sourced from state licensing registries.
What is the average rating for well & pump contractors in Phoenix?
Well & Pump contractors in Phoenix have an average Google rating of 4.7 stars across 1 rated contractor on EdgeLocal. Ratings are sourced from Google Business profiles.
Do well & pump contractors in Phoenix need to be licensed?
Yes. Arizona requires well & pump contractors to hold a valid state license. Always verify a contractor's license is current and in good standing before signing any contract or allowing work to begin.
How do I find a reliable well & pump contractor in Phoenix?
Start by verifying the contractor holds a valid Arizona license. Check their Google rating and read reviews. Get at least three written estimates. Confirm they carry general liability and workers' compensation insurance. Ask for references from recent Phoenix jobs.
General Well & Pump FAQs
How long does a well pump last?
Submersible well pumps typically last 8–15 years. Jet pumps last 8–12 years. Factors that shorten pump life include sediment in the water, cycling on and off too frequently (often caused by a waterlogged pressure tank), running dry, and power surges. Signs of pump failure include loss of water pressure, air sputtering from faucets, the pump running continuously, and higher electric bills. A waterlogged pressure tank causes the pump to short-cycle (turn on and off rapidly), which dramatically reduces pump life — replacing a failed pressure tank ($300–$800) is cheaper than replacing the pump.
How much does a new well cost?
A new residential water well costs $3,000–$15,000 depending primarily on depth. Drilling costs $15–$50 per foot, with typical wells ranging from 100–500 feet. Shallow wells (under 100 feet) cost less but may have lower flow rates and be more susceptible to contamination. The total project includes drilling, casing, pump, pressure tank, well cap, pitless adapter, and connection to the house. Water quality testing and treatment systems (iron filters, softeners, UV disinfection) may add $1,000–$4,000 depending on water chemistry.