Well & Pump Contractors in Newport News, Virginia
Water well drilling, pump installation, and repair..
Well and pump contractors drill new water wells, install and replace submersible and jet pumps, service pressure tanks, and maintain water treatment systems for homes and properties not served by municipal water. Well depth, water quality, and flow rate vary significantly by region and geology. A new residential well typically ranges from 100 to 500+ feet deep depending on the water table. Submersible pumps (installed inside the well casing) are the standard for deep wells, while jet pumps serve shallow wells under 25 feet. Regular maintenance — pressure tank checks, water quality testing, and pump inspection — extends system life and catches problems before you lose water.
55
Listed contractors
$3k–$15k
Typical cost
What to look for when hiring a well & pump contractor
- ✓Verify the contractor holds a well driller's license issued by your state.
- ✓Ask about flow rate testing and water quality testing as part of new well installation.
- ✓Get a written estimate that covers drilling depth, casing, pump, pressure tank, and all connections.
- ✓Ask about the warranty on the pump and any guarantee on minimum flow rate.
Well & Pump contractors in Newport News(55 listed)
How much does well & pump cost in Newport News?
New well drilling: $3,000–$15,000 depending on depth. Pump replacement: $800–$2,500. Pressure tank replacement: $300–$800. Water treatment system: $1,000–$4,000.
Well & Pump contractors in Newport News — FAQ
How many well & pump contractors are in Newport News?
EdgeLocal lists 55 licensed well & pump contractors in Newport News, Virginia. All listings are sourced from state licensing registries.
What is the average rating for well & pump contractors in Newport News?
Well & Pump contractors in Newport News are listed on EdgeLocal with ratings sourced from Google Business profiles. Use the directory to compare rated contractors near you.
Do well & pump contractors in Newport News need to be licensed?
Yes. Virginia requires well & pump contractors to hold a valid state license. Always verify a contractor's license is current and in good standing before signing any contract or allowing work to begin.
How do I find a reliable well & pump contractor in Newport News?
Start by verifying the contractor holds a valid Virginia license. Check their Google rating and read reviews. Get at least three written estimates. Confirm they carry general liability and workers' compensation insurance. Ask for references from recent Newport News jobs.
General Well & Pump FAQs
How long does a well pump last?
Submersible well pumps typically last 8–15 years. Jet pumps last 8–12 years. Factors that shorten pump life include sediment in the water, cycling on and off too frequently (often caused by a waterlogged pressure tank), running dry, and power surges. Signs of pump failure include loss of water pressure, air sputtering from faucets, the pump running continuously, and higher electric bills. A waterlogged pressure tank causes the pump to short-cycle (turn on and off rapidly), which dramatically reduces pump life — replacing a failed pressure tank ($300–$800) is cheaper than replacing the pump.
How much does a new well cost?
A new residential water well costs $3,000–$15,000 depending primarily on depth. Drilling costs $15–$50 per foot, with typical wells ranging from 100–500 feet. Shallow wells (under 100 feet) cost less but may have lower flow rates and be more susceptible to contamination. The total project includes drilling, casing, pump, pressure tank, well cap, pitless adapter, and connection to the house. Water quality testing and treatment systems (iron filters, softeners, UV disinfection) may add $1,000–$4,000 depending on water chemistry.