Generators Contractors in Renton, Washington
Standby and portable generator installation and service..
Whole-home standby generators automatically provide backup power during outages, protecting against food spoilage, frozen pipes, sump pump failure, and loss of medical equipment. Natural gas or propane-fueled standby generators (typically 12–24 kW for residential use) start within seconds of a power outage via an automatic transfer switch. Installation involves an electrical subpanel or whole-house transfer switch, a concrete pad, gas line connection, and compliance with setback and noise ordinances. Portable generators serve as a lower-cost option for partial backup but require manual setup and fuel management.
264
Listed contractors
4.5
Avg rating (1 rated)
$5k–$18k
Typical cost
Top rated generators contractors in Renton
What to look for when hiring a generators contractor
- ✓Ask the installer to perform a load calculation to properly size the generator for your home.
- ✓Confirm the estimate includes the transfer switch, concrete pad, gas line, and all permits.
- ✓Ask about warranty terms — most major brands offer 5-year limited warranties.
- ✓Verify the installer is authorized by the generator manufacturer (Generac, Kohler, Briggs & Stratton).
Generators contractors in Renton(60 listed)
How much does generators cost in Renton?
Portable generator: $500–$2,000. Standby 12 kW: $5,000–$8,000 installed. Standby 22 kW: $8,000–$15,000 installed. Transfer switch adds $500–$1,500 if not included.
Generators contractors in Renton — FAQ
How many generators contractors are in Renton?
EdgeLocal lists 264 licensed generators contractors in Renton, Washington. All listings are sourced from state licensing registries.
What is the average rating for generators contractors in Renton?
Generators contractors in Renton have an average Google rating of 4.5 stars across 1 rated contractor on EdgeLocal. Ratings are sourced from Google Business profiles.
Do generators contractors in Renton need to be licensed?
Yes. Washington requires generators contractors to hold a valid state license. Always verify a contractor's license is current and in good standing before signing any contract or allowing work to begin.
How do I find a reliable generators contractor in Renton?
Start by verifying the contractor holds a valid Washington license. Check their Google rating and read reviews. Get at least three written estimates. Confirm they carry general liability and workers' compensation insurance. Ask for references from recent Renton jobs.
General Generators FAQs
What size generator do I need for my home?
Sizing depends on what you want to power during an outage. A 12–14 kW generator handles essentials: refrigerator, sump pump, furnace, lights, and a few outlets. A 16–20 kW generator adds central air conditioning and a well pump. A 22–24 kW generator can power an entire average home including an electric range and dryer. Your installer should perform a load calculation based on your electrical panel to recommend the correct size. Oversizing wastes fuel and money; undersizing causes the generator to overload and shut down when you need it most.
How much does a whole-house generator cost?
A whole-house standby generator costs $5,000–$18,000 installed depending on size and fuel type. A 12 kW air-cooled unit runs $5,000–$8,000 installed. A 22 kW unit runs $8,000–$15,000 installed. Larger liquid-cooled units (25+ kW) cost $12,000–$20,000+. Installation includes the generator, automatic transfer switch, concrete pad, gas line connection, and permits. Natural gas is the most convenient fuel (no tank to refill); propane requires a tank ($1,000–$3,000 for a 500-gallon buried tank). Annual maintenance costs $150–$300.